Top Treatments
Fabricated Drapery
We offer a wide range of top treatments that bring focus to the window design, as well as conceal window covering hardware to create a finished look.
Key Features
- Ceiling and wall mounting available
- Ten cornice style choices
- All specified fabrics must meet NFPA 701 fire rating requirements
- Hunter Douglas Hospitality uses COM except for specified brand standards
Hampton Inn — Latham, NY 
Valance
Styles
- Box Pleat Valance: Double pleat, with the material folded under at each side; pleats are spaced 4” to 6” apart; Ceiling mounted valances use 1” x 2” wood frame
- Tailored Valance: Version of box pleat with minimal pleats; one to two pleats are created depending on the width of the window
Fabrication Details
- Lined with FR white lining
- Ceiling mounted valances use 1” x 2” wood frame
- Wall mounted valances typically fit into a header specified by the designer
Sizing
- Standard outside mounted valances are fabricated to a width of 1″ wider (inside dimension) than the drapery track size
- Returns
- 9” for two treatments at the window (sheer+drapery)
- Typically 11” for three treatments (sheer+drapery+side panels)
- May vary per project; please specify
- Height of a valance – typically 14” to 16”, please specify per project
Options
- Decorative banding and trim
Cornice
Fabrication Details
- Padded-face standard (padding is 100% polyester fiberfill)
- Dust cap and returns composed of 0.75″ wood
- Construction features self-welting on top and bottom edge of cornice
- Inside and top surface of cornice covered with white lining
- Styles B, C, and J not recommended for lengths over 75 inches
- Solid fabrics and fabrics without a directional pattern are railroaded to eliminate seams
- Standard mounting system is aluminum angle brackets
Sizing
- Please specify the width of outside mounted cornices
- Returns
- 9” for two treatments at the window (sheer+drapery)
- Typically 11” for three treatments (sheer+drapery+side panels)
- May vary per project; please specify
- Height of a cornice — typically 14” to 16”, please specify per project
Installation
- Ceiling Mount (no dust cap required)
- Wall Mount (dust cap required)
Options
- Banding may be added to styles A, D, and H
- Trim options and contract welting are also available